MTX Thunder TM1805 5Ch Marine Amplifier

MTX Thunder TM1805 5Ch Marine Amplifier Reviews

Other Picture

MTX Thunder TM1805 5Ch Marine Amplifier Feature

• 5 Channel, 600 Watts
• Power @ 14.4 VDC : 600 RMS / 1800 Max
• Bass Boost 0-18dB Centered @ 40Hz
• Maximum Sensitivity 200mV
• Salt Spray Tested ASTM B117-03

Thunder Marine is the new number one choice for marine audio with a complete line of amplifiers, speakers, and subwoofers. Unlike other marine product that is just a white version of car stuff, Thunder Marine is designed for the harshest marine environment. Conformal board coatings help to prevent corrosion, and thermal rail regulation helps to control amplifier temperature. Sealed covers keep amplifier controls and speaker terminals dry. Impact resistant grilles protect the speakers while still looking great.

Visit Store Now !!

Detail Products

• MTX TM6502WB 6.5" Marine Wakeboard Speakers Wht
• PYLE PLMRSW50 18 Gauge 50 FT Stereo Marine Grade Speaker Wire
• MTX TM1004 10" Marine Subwoofer
• MTX TM6502 6.5 Marine Coaxial Speakers
• MTX TM1204 12-Inch Marine Subwoofer

Detail Reviews

Boss NX2500.4 Onyx 2500 Watt 4-Channel Mosfet Bridgeable Amplifier with Remote

Boss NX2500.4 Onyx 2500 Watt 4-Channel Mosfet Bridgeable Amplifier with Remote Reviews

Other Picture

Boss NX2500.4 Onyx 2500 Watt 4-Channel Mosfet Bridgeable Amplifier with Remote Feature

• Four-channel Onyx amplifier with MOSFET power supply and trimode operation
• Delivers 625 Watts x 4 at 2 ohms; 250 Watts x 4 at 4 ohms; 1250 Watts x 2 bridged
• Line and speaker level inputs with variable gain control
• Built-in low- and high-pass variable crossovers; 18dB bass boost
• Includes remote subwoofer level control

Boss Audio's newly designed Onyx amplifiers bring you every configuration you could need, for any system setup. State-of-the-art circuitry and power supply design optimize efficiency while delivering tremendous power output with plenty of headroom. The NX2500.4 is a four-channel MOSFET amp with 1250 watts x 2 peak power (bridged).

A four-channel MOSFET amp with 1250 watts x 2 peak power (bridged). Click to enlarge.

Onyx amps include a remote subwoofer level control.

Four-Channel or Bridged Mode
Run in four-channel mode for 625 Watts x 4 peak power at 2 ohms (250 Watts x 4 at 4 ohms) or bridge at 4 ohms for 1250 Watts x 2 peak.

Trimode Operation
This allows you to send your signal to a tri-way crossover for adding a subwoofer to the front/rear two-channel output.

Remote Subwoofer Level Control
Onyx amps include a remote subwoofer level control. If you're using it to power a sub, you'll be able to quickly make level adjustments.

Line/Speaker Level Inputs
Separate line and speaker level inputs mean the Onyx can handle high-level signals from receivers lacking RCA outputs.

Built-In Crossovers
This amplifier features variable high- and low-pass crossovers, so you can adjust the sound to suit whatever speakers you're driving.

Variable Gain Controls
Allows you to match the input gain to your receiver for better sound with less distortion.

MOSFET Power Supply
For high performance with low heat.

Bass Boost
Add a little extra low-end power with 0 to +18dB of variable bass boost.

Power and Protection LEDs
Protection LEDs let you know when there's a problem.

What's in the Box
Boss NX2500.4 Amplifier, Subwoofer Level Control, User's Manual Boss NX2500.4 2500 Watt 4-Channel Mosfet Bridgeable Amplifier with Remote

Visit Store Now !!

Detail Products

Detail Reviews

MB Quart ONX4.80 4 Channel Amplifier 4 x 80 @ 4 OHMS, 4 x 160 @ 2 OHMS, 2 x 320 @ 4 OHMS

MB Quart ONX4.80 4 Channel Amplifier 4 x 80 @ 4 OHMS, 4 x 160 @ 2 OHMS, 2 x 320 @ 4 OHMS Reviews

Other Picture

MB Quart ONX4.80 4 Channel Amplifier 4 x 80 @ 4 OHMS, 4 x 160 @ 2 OHMS, 2 x 320 @ 4 OHMS Feature

• 4 x 80 Watt A/B Stereo Amp
• Exquistie Onyx heat sink desing
• Variable Low Pass, High Pass, Band pass
• Illuminated MB Quart logo
• System Diagnostics

MB Quart 4 Channel Amplifier 4 x 80 @ 4 OHMS, 4 x 160 @ 2 OHMS, 2 x 320 @ 4 OHMS

Visit Store Now !!

Detail Products

• MB Quart Premium PVI216 6.5" 2-Way Component/Convertible Coaxial Speakers
• MB Quart ONX1.1500D Amplifier 1 x 500 @ 4 OHMS, 1 x 1000 @ 2 OHMS, 1 x 1500 @ 1 OHM
• Pair of Brand New Mb Quart Onx216 6.5" Inch 240 Watt 2 Way Component Car Stereo Speakers with Amazing Quality Titanium Coated Tweeters with Adjustable Attenuation!
• MB Quart Formula FTA169 6 x 9" 3-Way Speaker System
• Alpine Type-S SPS-600C - Car speaker - 80 Watt - 2-way - component

Detail Reviews

Brand New Formula Mach-5175 1,000 Watt 2 Channel Bridgeable Car Amplifier with Full Mosfet Power Supply and Adjustable Crossover Filters

Brand New Formula Mach-5175 1,000 Watt 2 Channel Bridgeable Car Amplifier with Full Mosfet Power Supply and Adjustable Crossover Filters Reviews

Other Picture

Brand New Formula Mach-5175 1,000 Watt 2 Channel Bridgeable Car Amplifier with Full Mosfet Power Supply and Adjustable Crossover Filters Feature

• Formula 1,000 watt 2 channel car amplifier
• Mosfet Power supply
• Overload, Short, Thermal Protection Circuitry
• Built in adjustable bass boost from 0 - 18 dB @ 45 hz.
• Complete crossover system built in with high pass, low pass, and full pass

BRAND NEW FORMULA MACH-5175 1,000 WATT 2 CHANNEL BRIDGEABLE CAR AMPLIFIER WITH FULL MOSFET POWER SUPPLY AND ADJUSTABLE CROSSOVER FILTERS Features: Formula 1,000 watt 2 channel car amplifier Mosfet Power supply Overload, Short, Thermal Protection Circuitry Built in adjustable bass boost from 0 - 18 dB @ 45 hz. 500 watts x 2 @ 2 ohms 1,000 Watts x 1 @ 4 ohms in bridged mode 175 x 2 RMS RATED Complete crossover system built in with high pass, low pass, and full pass Crossover is adjustable from 50 HZ - 250 HZ frequency response: 20 Hz to 20 kHz 60 dB channel separation High / Low impedance input Input sensitivity control 2 ohm stable stereo mode 4 ohm stable in bridged mode Power and Protection LED Indicator RCA & Terminal Connectors Delay Turn On Option 22K ohm input impedance adjustable input sensitivity THD: less than .05% Dimensions: 300 mm length x 262 mm width x 55 mm height adjustable gain 90 dB signal-to-noise ratio remote turn on input Tri-Mode capable

Visit Store Now !!

Detail Products

Detail Reviews

Brand New Nitro Bmw-481 800 Watt 2 Channel Bridgable Car Amplifier **Half Off Store Prices**

Brand New Nitro Bmw-481 800 Watt 2 Channel Bridgable Car Amplifier **Half Off Store Prices** Reviews

Other Picture

Brand New Nitro Bmw-481 800 Watt 2 Channel Bridgable Car Amplifier **Half Off Store Prices** Feature

• 800 watts maximum output
• 2-channel amplifier (bridgeable to 1 channel)
• Built-in low pass crossover 30-250Hz
• Built-in high pass Crossover filter: 50Hz-1KHz
• Frequency response: 20Hz-30k HZ

BRAND NEW NITRO BMW-481 800 WATT 2 CHANNEL BRIDGABLE CAR AMPLIFIER **HALF OFF STORE PRICES** Features: 800 watts maximum output 2-channel amplifier (bridgeable to 1 channel) Wired bass remote bass boost w/LED Built-in full crossover Built-in low pass crossover 30-250Hz Built-in high pass Crossover filter: 50Hz-1KHz Variable bass boost Variable gain control MOSFET power supply 3-way protection with LED Frequency response: 20Hz-30k HZ High low impedance input Gold-plated RCA/power/speaker terminals Dual color power/protection status LED Blue interior illumination

Visit Store Now !!

Detail Products

Detail Reviews

Absolute USA Vicious Series DVI4000 4000-Watt Maximum Power 2-Channel Amplifier

Absolute USA Vicious Series DVI4000 4000-Watt Maximum Power 2-Channel Amplifier Reviews

Other Picture

Absolute USA Vicious Series DVI4000 4000-Watt Maximum Power 2-Channel Amplifier Feature

• 4 Channel 4000 Watts Power Amplifier
• 4000 Watts
• Bass Boost Controls

Absolute Vicious Series DVI4000 4000-Watt Maximum Power 2-Channel Amplifier

Visit Store Now !!

Detail Products

Detail Reviews

Brand New Rockford Fosgate Punch Serieis 500w RMS 4 Channel Amplifier

Brand New Rockford Fosgate Punch Serieis 500w RMS 4 Channel Amplifier Reviews

Other Picture

Brand New Rockford Fosgate Punch Serieis 500w RMS 4 Channel Amplifier Feature

• New Rockford Fosgate Punch Series P5004 4-Channel Class AB Car Amplifier
• RMS Power at 4 ohms: 60 watts x 4 channel
• RMS Power at 2 ohms: 125 watts x 2 channel
• RMS Power at 1 ohm: 250 watts x 2 channel
• MOSFET power supply

Brand new Rockford Fosgate Punch Serieis 500w RMS 4 channel amplifier Features: New Rockford Fosgate Punch Series P5004 4-Channel Class AB Car Amplifier RMS Power at 4 ohms: 60 watts x 4 channel RMS Power at 2 ohms: 125 watts x 2 channel RMS Power at 1 ohm: 250 watts x 2 channel MOSFET power supply Remote bass level input Included LED power, thermal, and protect indicators Tuned Bass EQ (0-18 dB bass boost at 45 Hz or 0-12 dB bass boost at 12 kHz) Efficiency (average) 70.5% @ 4-Ohm / 66.5% @ 2-Ohm On-board differential inputs eliminates noise picked up by the signal cable Integrated Trans?ana technology Featured custom designed TO-247 MOSFETs have 60% more metal tab area providing more power handling capacity Built in NOMAD: ultimate protection against amp failure Cast aluminum Heatsink Nickel-plated RCA level inputs Nickel-plated screw terminals Variable high-pass filter (50-500 Hz, 12 dB/octave) Variable low-pass filter (50-500 Hz, 12 dB/octave) Frequency response: 20-20,000 Hz Dimensions: 9"L x 7-5/8"W x 2-1/4"H 4-Gauge Power and Ground Leads CEA-2006 compliant amplifier

Visit Store Now !!

Detail Products

• Rockford Fosgate Punch PEQ Equalization Remote

Detail Reviews

Brand New Boston Acoustics Gta-502 160 Watt RMS GTA Series 2 Channel Class Ab Car Amplifier

Brand New Boston Acoustics Gta-502 160 Watt RMS GTA Series 2 Channel Class Ab Car Amplifier Reviews

Other Picture

Brand New Boston Acoustics Gta-502 160 Watt RMS GTA Series 2 Channel Class Ab Car Amplifier Feature

• GTA Series 2-Channel Class AB Car Amplifier
• Bass Remote Details (Boston Acoustics GTA-RSL required)
• Bass Boost/EQ details (0-6 dB bass boost at 45 Hz)
• Speaker-level inputs with signal sensing for automatic turn-on
• 3-Way System Protection circuitry (thermal, overload, and speaker short protection)

Brand New Boston Acoustics GTA-502 160 Watt RMS GTA Series 2 Channel Class AB Car Amplifier Features: GTA Series 2-Channel Class AB Car Amplifier MOSFET power supply Bass Remote Details (Boston Acoustics GTA-RSL required) LED power and protect indicators Bass Boost/EQ details (0-6 dB bass boost at 45 Hz) Boston's Q-TuneTM circuitry for simple bass output optimization 2/1 channel operation Speaker-level inputs with signal sensing for automatic turn-on Preamp RCA outputs 3-Way System Protection circuitry (thermal, overload, and speaker short protection) SSTTM (Symmetrical Signal Topology) system uses balanced asymmetrical inputs for noise cancellation Recessed control panel for clean installation Wrap-around heatsink design for ample cooling in multiple mounting positions IMSTM (Integral Mounting System) reduces the amplifier footprint All input/output connections are located on one side of the amplifier to ease installation and wire management Optimal angled speaker and power blocks for easy wire connections Gold-plated RCA level inputs Gold-plated screw terminals CEA-2006 compliant amplifier

Visit Store Now !!

Detail Products

Detail Reviews

Pyle PLA4278 4 ch 2000 Watts Bridgeable Mosfet Amplifier

Pyle PLA4278 4 ch 2000 Watts Bridgeable Mosfet Amplifier Reviews

Other Picture

Pyle PLA4278 4 ch 2000 Watts Bridgeable Mosfet Amplifier Feature

• Maximum Power Output 4 x 500W - 2 Ohm Stable - Custom Terminal Block for Speaker Connection - S/N Ratio: >90dB
• Bridgeable RMS Power @ 4 Ohms: 2 x 1000W - MOSFET Power Supply - Thermal / Overload / Short Circuit Protection - Dimensions:10.24''W x 2.21''H x 14.58''L
• 4 Channel Bridgeable MOSFET Amplifier - PWM ( Pulse-Width-Modulation ) System - Input Impedance: 47K Ohms
• Frequency Response 20 Hz-50kHz (±3dB) - Glass Epoxy PCB - Soft Turn On/ Off
• Output Power @ 14.4v DC, 50Hz - Silver RCA Inputs - Advanced Protection Circuitry

When power isn’t enough, you need Pyle Power. This four-channel, 2000-watt power supply is bridgeable. It’s equipped with everything you’ve come to expect from quality car amplifiers. The RCA ports are silver-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut, so your speakers will always be delivered the highest quality audio. The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your speakers. To keep both your car and the amplifier safe, this model is equipped with thermal, overload, and short circuit protection. So when what you need is power, trust Pyle Power.

Visit Store Now !!

Detail Products

• Boss KIT-2 Complete 8 Gauge Amplifier Installation Kit
• Pyle PL63BL 6.5-Inch 360-Watt 3-Way Speakers
• Clarion EQS746 1/2 DIN Graphic Equalizer with Built-in Crossover
• Pyle PLA2200 2-Channel 1400-Watt Bridgeable Mosfet Amplifier
• Pyle PL1290BL 12-Inch 1200 Watt DVC Subwoofer

Detail Reviews

Brand New Power Acoustik Bamf1800/2 1800 Watt 2 Channel Amplifier with Remote Bass Knob

Brand New Power Acoustik Bamf1800/2 1800 Watt 2 Channel Amplifier with Remote Bass Knob Reviews

Other Picture

Brand New Power Acoustik Bamf1800/2 1800 Watt 2 Channel Amplifier with Remote Bass Knob Feature

• Power Acoustik BAMF1800/2 1800 watts amp
• 1800 watt 2 channel amp
• 1 x 760 watts Bridged @ 4 ohm
• Three-Way Protection Circuitry (short, thermal & overload)
• Selectable Hi/Full/Low Pass Crossovers

BRAND NEW POWER ACOUSTIK BAMF1800/2 1800 WATT 2 CHANNEL AMPLIFIER WITH REMOTE BASS KNOB Features: Power Acoustik BAMF1800/2 1800 watts amp 1800 watt 2 channel amp 1 x 760 watts Bridged @ 4 ohm 2 x 380watts RMS @ 2 ohms 2 x 300 watts RMS @ 4 ohm 2 channel Jet Black Texture Coat Finish All MOSFET Transistor Amplifier Pulse Width Modualtion Circuitry Three-Way Protection Circuitry (short, thermal & overload) 2 Ohm Stereo, 4 Ohm Bridged Stable Tri-Mode Capable Selectable Hi/Full/Low Pass Crossovers Pre-Amp Outputs Dash Mount Remote Gain Control 200mV - 6V Low Level Input Sensitivity Variable 12dB 30-250Hz LPF Variable 12dB 50-500Hz HPF Variable 0-12dB 45Hz Bass Boost Variable 12 dB 15-50Hz Subsonic Filter Frequency Response: 10Hz - 30kHz Signal-to-Noise Ratio: 97dB Total Harmonic Distortion: .02% 4 ga. Power & 8 ga. Speaker Terminals Fuse Rating: 60A (3 x 20A FUSES)

Visit Store Now !!

Detail Products

Detail Reviews

Kicker 08ZX3504 4X90-Watt 4-Channel Amplifier

Kicker 08ZX3504 4X90-Watt 4-Channel Amplifier Reviews

Other Picture

Kicker 08ZX3504 4X90-Watt 4-Channel Amplifier Feature

• 4 x 90 Watt stereo amplifier
• Built-in 12dB/octave high-, low-, or all-pass electronic crossover variable from 50 to 200 hertz
• KICKEQ Boost offers up to 18 decibels of bass centered at 40 Hz
• Balanced differential inputs for noise elimination
• One-year limited warranty

ZX dominance means severe stereo or mono amplifier power surging into corresponding KICKER subwoofers and speakers. ZX dominance also means the utmost reliability from the biggest name in trouble-free amplification and loud, clear sound.

Trouble-free amplification and loud, clear sound. Click to enlarge.

All ZX Amps are now outfitted with differential RCA inputs.

Add a remote bass control to easily tweak your sound on the fly.

ZX-Series Amplifiers return for 2008 as reliable as ever--21 no-fault options to run a complete car audio system. Two-channel, four-channel, three- and five-channel hybrids, and absurd single-channel subwoofer amps round out a hard-working, noise-free lineup known for supplying the force until the listener shuts the music down. And now all ZX Amps are outfitted with differential RCA inputs, completely eliminating unwanted whines and audio trash and making for the most enjoyable listening experience possible. Differential inputs and new automatic turn-on modes make ZX Amps some of the most complete power producers on the market.

ZX Multi-Channel and Hybrid Amplifiers
Six ZX-Series Multi-Channel Amplifiers put the choice of system installation in your hands. Power ranges from 50 watts x 4 channels up to 215 watts x 4, giving the user plenty of system decisions to make. These amps carry the same crossover and KICKEQ Bass Boost as the stereo amps, but they also include a useful fader dial. Two popular hybrid models among the multi-channel amps feature a sub-rattling, 420-watt Class D channel to go along with 85 watts/channel in the ZX.3 amp and the 85 watts x 4 in the ZX.5 amp. Boost remains available, but through the sub sections only.

ZX350.4 Features

• 3 automatic turn-on modes
• Balanced differential inputs for noise elimination
• RCA inputs have direct speaker level input capability
• Easily removable top allows for custom painting
• Optional end caps
• 2 ohm stability on all amps
• Angled power connections

What's in the Box
ZX350.4 amplifier, Mounting hardware, User's manual ZX dominance means severe stereo or mono amplifier power surging into corresponding KICKER subwoofers and speakers. ZX dominance also means the utmost reliability from the biggest name in trouble-free amplification and loud, clear sound.

Visit Store Now !!

Detail Products

• Kicker 08ZX7501 750-Watt Class D Mono Subwoofer Amplifier
• DB Link PK4Z 4 Gauge Power Series Amplifier Installation Kit
• Boss KIT-2 Complete 8 Gauge Amplifier Installation Kit
• Infinity Reference 6030cs 6.5-Inch 270-Watt Two-Way Component System
• Polk Audio DB651 6.5-Inch Coaxial Speakers

Detail Reviews